Key Takeaways
A 50 kVA air cooled servo stabilizer suits clean, dry, ventilated rooms and carries a running load of about 32 kW.
The room matters as much as the load, because the unit is cooled by the air around it.
Installing it needs a firm floor, clear vents, sound earthing and a surge protection device.
Maintenance is light: weekly readings, monthly dusting and a yearly brush check.
For dusty, hot or round-the-clock sites, an oil cooled unit is the better choice.
50 kVA Air Cooled Servo Stabilizer at a Glance
A 50 kVA air cooled servo stabilizer carries a running load of about 32 kW, handles about 70 A per phase and delivers 410 V ±1%. The table lists its main figures.
| Specification | 50 kVA air cooled servo stabilizer |
|---|---|
| Capacity | 50 kVA, about 40 kW at a 0.8 power factor |
| Safe running load | About 32 kW |
| Supply | Three phase, four wire, 415 V |
| Current | About 70 A per phase at 415 V |
| Cooling | Natural or fan air flow |
| Best site | Clean, dry, ventilated indoor rooms |
| Duty | Continuous, in a cool room |
| Output | 410 V ±1% phase to phase, at 97% efficiency |
| Routine care | Dust cleaning and brush checks; no oil to test |
| Size | Lighter and more compact than an oil cooled unit |
How Does an Air Cooled Servo Stabilizer Stay Cool?
An air cooled servo stabilizer loses its heat to the air in the room. You may also see it called a natural air cooled, fan cooled or dry type stabilizer. Air passes over the transformer and windings, by natural flow or with fans, and carries the heat out through the vents. This is heat dissipation by air.
Two things follow from this:
The room does part of the cooling. A cool, ventilated room keeps the unit cool. A hot, closed room does not.
The unit breathes the room's air. Whatever is in that air, including dust and moisture, reaches the inside of the cabinet.
That is why an air cooled unit is chosen by the room, not by the load. Cooling does not change how the unit corrects voltage fluctuations; our guide on how a servo stabilizer works explains that side. Servo stabilizers are covered by Indian Standard IS 9815 (Part 1), published by the Bureau of Indian Standards.
Is Your Site Right for a 50 kVA Air Cooled Servo Stabilizer?
A site is right for a 50 kVA air cooled servo stabilizer if it is indoors, clean, dry, ventilated and cool, and the running load is about 32 kW or less. Answer these five questions to check yours.
Will the stabilizer stand indoors, in a dry room?
Is the room clean, without dust from machining, plastics or packaging?
Is the room ventilated, with free air flow around where the unit will stand?
Does the room stay cool through the day?
Is your running load about 32 kW or less?
If you answer no to any of the first four, an oil cooled unit is the safer choice for that site. If you answer no to the fifth, you need a larger size.
Not sure about your room? Send us its size, a photo and your load list, and we will tell you whether an air cooled unit will work there.
Which Sites Use a 50 kVA Air Cooled Servo Stabilizer?
A 50 kVA air cooled unit is most common in commercial buildings, where the electrical room or panel room is clean and the load is a mix of air conditioners, lifts, lighting and equipment.
| Site and load | Running load | Does air cooled suit? |
|---|---|---|
| Hospital or nursing home: equipment, air conditioners, lighting | About 28 kW | Yes |
| Office or showroom: about 12 air conditioners, computers, lighting | About 25 kW | Yes |
| Apartment block: two lifts, pumps, common lighting | About 30 kW | Yes, in a dry, ventilated panel room |
| Small factory: motors, lighting, fans | About 30 kW | Yes, if the unit stands in a clean panel room away from the shop floor |
| Two or three mid-size CNC machines with a compressor | About 28 to 30 kW | Only in a clean room; on a dusty shop floor, choose oil cooled |
Buildings with single-phase loads spread across the phases usually take the unbalanced design. Our guide on balanced vs unbalanced servo stabilizers explains the difference.
What Room Does an Air Cooled Unit Need?
A 50 kVA air cooled servo stabilizer needs a firm, level floor in a clean, dry, cool and ventilated room, with free air flow around its vents.
A firm, level floor. The unit is floor mounted.
A dry, ventilated room. Keep it away from water, steam and damp walls.
A cool room. The lower the ambient temperature, the cooler the unit runs.
Free air flow. Do not box the unit in, cover it or stack things against the vents.
A position near the main distribution board. This keeps cable runs short.
Distance from quiet areas. The unit hums while it corrects, so keep it away from offices, wards and bedrooms.
An air cooled 50 kVA unit is compact. Units of this rating listed online measure about 850 × 520 × 770 mm, so it fits most panel rooms.
How Is a 50 kVA Air Cooled Servo Stabilizer Installed?
A qualified electrician installs a 50 kVA air cooled servo stabilizer on the mainline, after the meter, following the CEA safety and electric supply regulations. Like every 3 phase stabilizer, it connects to a 415 V, four-wire supply. The steps below apply to an air cooled unit.
Place the unit on the floor in its final position, with the vents clear.
Size the cables for the current. A 50 kVA unit carries about 70 A per phase at 415 V, and the input side draws more when the mains voltage is low.
Connect the body earth terminal to the building earthing. A sound earth pit, built with earthing rods or an earth electrode, matters here.
Check the phase sequence and the neutral connection before switching on.
If the site has a UPS, connect the stabilizer first and the UPS after it.
Fit a bypass switch, and use it only during servicing. On bypass the load is unprotected.
Fit a surge protection device ahead of the stabilizer. A stabilizer corrects slow voltage changes, not lightning spikes.
Check that the fans and vents are clear before the first switch-on.
Our servo stabilizer installation guide covers wiring, earthing and commissioning in full.
How Do You Maintain an Air Cooled Servo Stabilizer?
An air cooled servo stabilizer needs a weekly check of its readings, monthly dusting of the body and vents, and a yearly brush inspection and service. There is no oil to test or top up.
| Task | How often | Who |
|---|---|---|
| Check input and output readings on each phase | Weekly | User |
| Dust the body and vents | Monthly | User |
| Inspect and replace worn carbon brushes | Yearly, or if correction slows | Trained technician |
| Full service and calibration | Yearly, or under an AMC | SG Power service |
Dusting matters more on an air cooled unit than on any other type. Blocked vents trap heat inside the cabinet. If the room turns out dustier than expected, clean the vents more often.
SG Power provides a standard 1-year (12-month) manufacturer warranty on its servo voltage stabilizers, with extended warranty and Annual Maintenance Contract (AMC) options. If you would rather not handle the servicing yourself, ask about an AMC when you request a quote.
What Are the Advantages and Limits of Air Cooling at 50 kVA?
The main advantage of a 50 kVA air cooled servo stabilizer is that it is lighter and more compact, with no oil to maintain. Its main limit is that it needs a clean, dry, ventilated room.
Advantages
Lighter and more compact than an oil cooled unit of the same rating.
No oil to check, test or top up.
Simple upkeep that site staff can do: readings and dusting.
Limits
It needs a clean, dry, ventilated room.
For a load that runs 24x7 in a warm room, oil cooled is the better choice.
50 kVA is the largest air cooled size. Loads above about 32 kW need a larger, oil cooled unit.
If your site falls outside these limits, an oil cooled servo stabilizer is the better fit. The same 50 kVA rating is also built as an oil cooled model, and the next size up is the 60 kVA oil cooled servo stabilizer.
Thinking of Buying One?
If the checks above point to air cooled, here is what you get when you buy the unit from SG Power.
Built in our own factory. Transformers are wound and tested in-house at Ghaziabad.
Tested before dispatch. Every unit passes 173 checkpoints.
Steady output. 410 V ±1% at 97% efficiency, tested to IS 2026 (Part 1).
Matched to your site. Balanced or unbalanced design, with the input range your supply needs.
Backed after the sale. A 1-year manufacturer warranty, with AMC options.
A free load and site-voltage check before you order.
What Do Customers Say About SG Power?
SG Power is rated 4.2 out of 5 by 132 buyers on IndiaMART (checked October 2026). The rating covers all SG Power products, including servo stabilizers, and the individual reviews can be read on IndiaMART.
| Source | Rating | Number of Ratings |
|---|---|---|
| IndiaMART | 4.2 out of 5 | 132 |
Which Air Cooled Sizes Does SG Power Make?
SG Power's air cooled servo stabilizer range has seven sizes, from 10 kVA to 50 kVA.
| Air cooled size | Safe running load | Current per phase at 415 V |
|---|---|---|
| 10 kVA | About 6.4 kW | About 14 A |
| 15 kVA | About 9.6 kW | About 21 A |
| 20 kVA | About 12.8 kW | About 28 A |
| 25 kVA | About 16 kW | About 35 A |
| 30 kVA | About 19.2 kW | About 42 A |
| 40 kVA | About 25.6 kW | About 56 A |
| 50 kVA | About 32 kW | About 70 A |
Pick the size by running load. If you are not sure of yours, our guide on how to calculate servo stabilizer kVA shows the method. If your load is about 25 kW or less, the 40 kVA air cooled servo stabilizer is enough. Small factories, hotels and buildings often use the 30 kVA servo stabilizer. Smaller buildings and single machines are served by the 25 kVA servo stabilizer and the 20 kVA air cooled servo stabilizer. Large homes and small offices take the 15 kVA servo stabilizer or the 10 kVA servo stabilizer. Every size is a 3 phase servo stabilizer, and the full range is on the servo voltage stabilizer page.
What Should You Ask Suppliers Before You Buy?
Ask these five questions before you accept a quote for an air cooled unit.
Is the unit cooled by natural air flow or by fans?
Is it rated for continuous duty at the temperature of my room?
What clear space does it need around the vents?
What are its dimensions and weight?
Who carries out the yearly brush inspection and service?
SG Power is among the 50 kVA servo stabilizer manufacturers and suppliers that build the unit in-house and answer these questions in the quote. Our guide on how to compare servo stabilizer quotes covers the rest.
Frequently Asked Questions
Get a Quote for a 50 kVA Air Cooled Servo Stabilizer
Tell us about the room where your 50 kVA air cooled servo stabilizer will stand and the load it will carry. We will confirm that air cooled suits the site and send a quote for the 50 kVA servo stabilizer.
